Medline MP3

Manufacturer Medline

Is designed for monitoring patients when moving to a medical facility


Please do not hesitate to contact InvestMedical Overseas Sales Dept.
if you have any questions on distribution in overseas market.
E-MAIL : info@invest-medical.com

The MP3 patient Monitor, a Medline trademark, is designed for monitoring patients when moving to a medical facility, moving outside a medical facility, and monitoring patients in bed in the intensive care unit. It can be used to track ECG, NIAD, SpO2, temperature (TEMP), respiratory rate (RESP), pulse (PR) and EtCO2 of patients.

The device supports the functions of respiratory oxygenation calculations, ST segment analysis and arrhythmia analysis.

The patient Monitor MP3 is a universal ultra-compact patient transport monitor. Designed specifically for use on ambulances. All internal modules, as well as the housing made of special plastic, are made in such a way that the monitor can withstand a free fall from a height of 1.5 m.

The MP3 monitor is equipped with a touch screen with handwriting support. The mode of displaying information on the screen is an oxycardiorespirogram. The monitor software contains a library of medications. The mode of displaying trends is wave or numeric. Recording 48 hours of readings. The system of visual and graphical alarms allows you to set the lower and upper threshold for triggering the observed parameters.

The monitor can be powered from the vehicle's on-board 12V network, from the AC 220V network, from a USB port or a universal charger.

Technical characteristics of the MP3:

  • Monitored parameters: SPO2
  • Measurement method-absorption photometry
  • SpO2 alarm registration range: 0-100%
  • PE measurement range: 20-300 beats / min

ECG

  • Registration of an ECG with 5 leads
  • Determination of the pacemaker

Analysis of arrhythmias

  • Determination of the ST segment offset

Determination of heart rate/emergency

  • Protection against defibrillation, EHF devices

NIAD

  • Measurement modes: manual, automatic, continuous
  • In automatic mode, the range is adjustable from 1 to 480 minutes
  • In continuous mode, the pressure is measured within 5 minutes
  • Measurement range: 0 ~ 300 mmHg.
  • 2 temperature channels
  • Registration of readings from two sensors
  • Measurement range: 0 ~ 50 ° C
  • CO2 in the side stream (the gas intake module is purchased separately).

Size: 190 mm×82 mm×105 mm
Weight about 1.5 kg


If you need any help, please contact us send us an email

Name*
Your E-mail*
Phone*
Country
Company
Message*
CAPTCHA
CAPTCHA
Type the letters you see on the picture*
By sending a message, you agree to the processing of your data specified in the request.